Kenwood DM-VH7 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 52

Kenwood DM-VH7 Скачать руководство пользователя страница 10

10

DM-VH7 (EN)

Installation

The front feet attached at the factory can be replaced with the provided replacement feet.
When you want to stack the RD-VH7 (optional) above this unit, installed this unit horizontally by using
the provided horizontal installation spacer.

÷

Remove the MD and unplug the power cord be-
fore proceeding to the following operation.

÷

Only the front feet can be replaced.

÷

When attaching replacement front feet, use only
the screws which have been used with the re-
moved feet. (Using other screws may result in a
fire or malfunction.)

÷

If this unit is fell down by mistake after installation
and if an MD is left inside the unit, the MD may be
damaged.

Check the following accessories

Replacement front feet .................................... 2

Spacer for horizontal installation .................... 1

Allen wrench ..................................................... 1

1

Using the Allen wrench, remove the 2 screws
from the front foot located on the left when
the unit is seen from the front.

View of the unit
when it is placed
vertically

1

Attach the spacer by inserting its claws into the
spacer mount holes on the rear of the this unit.
NOTE

When inserting the claws, align them
with the holes by tilting the spacer slightly
(about 20 degrees) as shown in the illus-
tration.

2

Arrange the cords by winding them around
the spacer.

The audio cords and system control cord can be
accommodated into the trench on the spacer by
winding them as shown in the illustration.

Horizontal, stacked installation (When stacking the optional RD-VH7 above the unit)

Vertical installation

Notes

Notes

Notes

Step

1

Step

2

Front feet removed in step

1

Use the provided spacer for horizontal installation.

Spaser

Claw

Change the left front foot location as described below.

2

Align the removed front foot with the
threaded holes on the rear part of the right
side panel, and attach the front foot using the
screws removed in step

1

.

Changing the installation method

3

Stack the RD-VH7 by aligning its feet with the
foot support cavities on the spacer.

Spaser mount
hole

«
...
8
9
10
11
12
...
»

Содержание DM-VH7





















































Отзывы:

Нет отзывов