manualshive.com logo in svg

Kenwood DM-SE9, Инструкция по эксплуатации

Поделиться
Скачать
Kenwood DM-SE9 Скачать руководство пользователя страница 51

DM-SE9(En)

51

In case of difficulty

Other symptoms

Remedy

Cause

Symptom

The cords are connected errone-
ously.

No disc has been loaded.

A non-recorded disc has been
loaded.

Sound is not output even when
the play key is pressed.

Connect the cords in accordance with
“System connections”.

@

Load a disc.

&

Load a prerecorded disc or playback-
only disc.

Recording is not possible

The disc is write-protected.

An attempt is made to record digital
signal from a source while its digital
copy has been prohibited by SCMS.

The recording level is too low (in case
of analog recording).

A playback-only disc has been loaded.

The disc does not have a recordable
area.

The 

REC INPUT

 key is not set to the

actual input source.

If the amplifier is connected to this unit
through a system control cord, the
amplifier’s input selector is set to the
MD input.

Change the position of the write
protect tab to the write position or
use a recordable disc.

90

Use analog recording.

¢

Adjust the recording level again.

¢

Use a recordable disc.

0

Use another disc.

Set it according to the actual input
source.

¢§

Set the amplifier’s input selector to
other position than MD.

Sound is distorted.

The recording level has not been ad-
justed.

A disc in which distorted sound has
been recorded is played.

Read “Adjust the recording level”.

¢

Use another disc.

An external noise is induced.

Install the unit at a position apart
from an electric appliance or TV set.

Noise is noticeable.

TOC

*1 

:

All minidiscs contain a Table of Contents (TOC) in addition to sound signals. The TOC is similar to the table
of contents in a book and contains information, such as track numbers, track length, and character
information, that cannot be rewritten.

p

TOC

*2 

:

In addition to the TOC, minidiscs also contain a special User’s Table of Contents (UTOC) that contains
track number, track length, and character information, that can be rewritten.

p

Содержание DM-SE9





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды