40
ENGLISH
Connection
When you connect a Bluetooth device to the unit for
the first time:
1
Register the device by pairing the unit and the
device.
2
Connect the device to the unit. (Page 41)
Registering a new Bluetooth device
Pairing allows Bluetooth devices to communicate with
each other.
• The pairing method differs depending on the
Bluetooth version of the device.
–
For devices with Bluetooth 2.1:
You can pair the device and the unit using SSP
(Secure Simple Pairing) which only requires
confirmation.
–
For devices with Bluetooth 2.0:
You need to enter a PIN code both on the device
and the unit for pairing.
• Once connection is established, it is registered in the
unit even if you reset the unit. Up to 10 devices can
be registered in total.
• Two Bluetooth devices for Bluetooth phone and one
for Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
Auto pairing
When
<Auto Pairing>
is set to
[ON]
on the
<TEL
SETUP>
screen, iOS (such as iPhone) devices are
automatically paired when connected via USB.
(Page 46)
Registering a Bluetooth device
1
Search for the unit (“DDX***” or
“DMX***”) from your Bluetooth device
and operate the device to register.
For a Bluetooth device compatible with SSP
(Bluetooth 2.1):
Confirm the request both on the device and the
unit.
On the device:
On the unit:
• Touch
[No]
to reject the request.
Bluetooth®
Bluetooth®
Information
Bluetooth is a short-range wireless radio
communication technology for mobile devices such as
mobile phones, portable PCs and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Note
• While driving, do not perform complicated
operations such as dialing numbers, using
the phonebook, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not connect to this unit
depending on the Bluetooth version of the device.
• This unit may not work for some Bluetooth devices.
• Connecting conditions may vary depending on your
environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
• If your mobile phone supports PBAP (Phone Book
Access Profile), you can display the following items
on the touch panel when the mobile phone is
connected.
–
Phonebook: up to 1 000 entries
–
Dialed calls, received calls, and missed calls (up to
50 entries in total)
Preparation
• Connect and install the microphone beforehand. For
details, see pages 63 – 65.
• Set
[Bluetooth]
to
[ON]
on the
<Bluetooth>
screen.
(Page 55)
EN̲DDX2018TC̲KR.indb 40
EN̲DDX2018TC̲KR.indb 40
2017/11/30 15:35
2017/11/30 15:35
