38
DDX4038BT/DDX4038BTM/DDX4038/DDX4038M
Setting menu items
• You cannot change <
Audio
> settings (except <
Preout Setup
>) when the unit is in standby.
Menu item
Selectable setting/item
Initial:
Underlined
A
udio
Fader/Balance
Fader
: Adjust the front and rear speaker output balance.
♦
F6
to
R6
; Initial
0
• When using a two-speaker system, set the fader to the
center (
0
).
Balance
: Adjust the left and right speaker output balance.
♦
L6
to
R6
; Initial
0
Press [
5
/
∞
/
2
/
3
] or drag [
] to adjust.
• To clear the adjustment, press [
Center
].
Equalizer
Change the sound mode or adjust and store the equalization
for each source. (
☞
page 31)
♦
Natural/Rock/Pops/Easy/Top40/Jazz/User
Loudness
You can activate/deactivate the loudness function.
♦
OFF
♦
ON
: Cancels.
: Boost low and high frequencies to
produce a well-balanced sound at a low
volume level. The LOUD indicator lights up.
X’over
Adjust the cross over frequency. (
☞
page 32)
Volume Offset
Adjust and store the auto-adjustment volume level for each
source. (For discs, the adjustment is stored for each of the
following categories: DVD/DVD-VR, VCD/CD, and DivX/
MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The volume level will
automatically increase or decrease when you change the
source.
♦
–15
to
+6
; Initial
0
Preout Setup *
1
♦
Rear
: Select this when rear speaker is connected
to REAR/SW jacks through an amplifier.
♦
Subwoofer
: Select this when subwoofer is connected
to REAR/SW jacks.
Subwoofer *
2
♦
ON
♦
OFF
: Activates the subwoofer.
: Cancels.
Speaker Select
Select the size of the connected speaker.
♦
Standard/Narrow/Middle/Wide
*
1
You can change the setting only when the unit is in standby.
*
2
Selectable only when <
Subwoofer
> is selected for <
Preout Setup
>.
EN_DDX_M.indb 38
EN_DDX_M.indb 38
10/12/20 16:48
10/12/20 16:48