(No.WA022<Rev.001>)29/36
[BACK] key:
invalid
• The following screen is displayed when update information
(update successful) is received.
[BACK] key:
invalid
4.2.7 STEERING REMOTE DEVELOPMENT screen
[BACK] key:
Goes back to the SERVICE MODE
4.3
Production mode
4.3.1 Key operation when going into production mode
Press and hold the [FNC] key (1) and press the [RESET] key (2).
4.3.2 Display, operation setting, and special key operation
in production mode
4.3.2.1
Display in production mode
In order to allow the operator acknowledge that they are in the
production mode, “Production Mode” POPUP is constantly dis-
played.
<Display/Hide Conditions>
Display:
GUI control screen, video screen <including Control,
Menu Control>
Hide:
Setup screen, MODE screen, Test Mode screen <SS,
Service>
4.3.2.2
Initial setting in production mode
*1: FAN is On at all times even during normal operation.
*2: Depends on the Back UP memory.
*3: Discards the Back UP memory and performs setting forcibly.
4.3.2.3
Special key operation in production mode only
(invalid in normal mode)
[TEL] key + [Touch panel upper right corner] (Press twice) Tran-
sit to SS mode.
4.3.2.4
Protection when production mode is continued
If the production mode continues for 30 minutes, the unit turns its
power OFF, and power ON is disabled until reset.
(1)
(2)
Item
Production
mode
Normal mode
Volume initial value
→
15(-34dB)
Volume maximum value
33(-10dB)
35(0dB)
FAN control
Always ON
ON/OFF *1
DISC module image output
NTSC
NTSC/PAL
SETUP > BEEP
OFF *3
ON *2
SETUP > CAMERA INPUT
ON *3
ON *2
SETUP > Audio > Fad/Bal
→
CENTER
SETUP > Audio > Vol Adjust
→
0 (all sources)
SETUP > Audio > HPF Front
→
Through
SETUP > Audio > HPF Rear
→
Through
SETUP > Audio > LPF
→
Through
SETUP > Audio > SW Level
→
0
SETUP > Audio > SW Phase
→
Normal
SETUP > Audio > Loudness
OFF
ON
SETUP > Audio > Equlizer
→
Natural
SETUP > Audio > Speaker Select
→
Standard
SETUP > Audio > Subwoofer
→
ON
SETUP > INPUT > AV-INPUT
AV-IN
AV-IN/iPod
(Depending on
the destination)
AV-OUT
DVD
OFF
