(No.WA022<Rev.001>)18/36
(4) Remove the five screws
A
attaching the Top cover assembly.
(See Fig.3)
Fig.3
(5) From the bottom side, disconnect the connector wire from
Top cover assembly connected to connector
CN2
of the
Front end board. (See Fig.4)
Fig.4
(6) From the bottom side, remove the spring from Traverse
mechanism assembly. (See Fig.5)
Fig.5
(7) From the top side, pull up the traverse mechanism and disengage
three dumper positions. (See Fig.6)
Fig.6
3.2.2 Removing the Front end board (See Fig.7)
(1) Remove the Motor wires from loading motor soldered to
TP79
and
TP81
of the Front end board.
(2) Remove the two screws
B
attaching the Front end board.
Fig.7
A
A
CN2
Dumper
(same color spring)
Dumper
(Different color spring)
B
B
TP79
TP81
