2. If the indicator light is on, check whether the VOL knob is in the minimum position. If so,turn clockwise to
normal Volume
3. If both of the above are normal, check the input device if it is paused, mute, or the volume is minimized.
Q:
Why does the sound is cracking
?
A: when theoutput powerexceeds the normal power of amplifier, there will be a large distortion. you can turn
down the front volume or the power amplifier volume, then it is ok.
Q: Why do loudspeakers make a lot of electric noise?
A: if you are not using the original factory standard power supply, please replace the power supply before
testing.Many power supply in the market have large interference coefficient, which will cause a lot of current
sound.
Q: Why connect signal line, not play music have interferential sound
A: If you use unshielded signal lines, there will be interference signals entering the power amplifier. If you hate
the sound, you are advised to use the shielded signal lines or unplug the signal lines.
Q: Why does the amplifier stop working after a period of time?After a period of time off, it was working again
A: Normally in this case, the amplifier is overheat protected, and the output power may have exceeded the
designed power, so you can lower the volume a little and try again.
Q: why does the volume of the machine stay the same, while the sound of different audio sources (such as
CDS and mobile phones) is different?
A: The output range of different types of audio source devices is different, the mobile phone is usually 0.35mV,
and the CD is 1V.The signaloutput amplitude of the sound source will directly influence the volume
Q: Whythe sound of the power amplifier is not very good at the beginning, the high frequency is not clear, but
after working for 8 hours the sound is normal?
A: Speaker and amplifier is a very sensitive equipment, also need to know each other, and the matching
process, usually thesound will be good after the new power amplifier and the speaker work more than ten
hours
Warning:
1. Please do not open the shell without permission. Improper operation may cause the danger of electric
shock.
2. Please use the power supply of the regular manufacturer, otherwise it will damage the machine.
3. Please do not use the machine in a high temperature and humidity environment.
