Operation Steps:
1. Make sure the VOL buttonto the minimum.
2. Connect the left and right speakers according to the interface instruction of the
rear surface, and pay attention to distinguish positive and negative.
3. Connect the sound source that needs to be used
（
Use bluetooth transmission to
refer to the next step
）
4.Switch to bluetooth for bluetooth input when using bluetooth input, the blue light
of bluetooth indicator flickers, and the blue light remains on after the phone is
connected successfully
5. Connect to power.
6. Press the power switch.
7. Turn the VOL button clockwise to select the desired volume.
8.
The tonal version can be rotated to select the appropriate EQ
9.
After connecting the earphone output, the speaker will automatically disconnect
Bluetooth connection:
Press the power button, and press the power button again to enter the Bluetooth
connection mode. At this time you will see the blue light flashing. Turn on your
mobile phone and search for the device. You will see DROK-AUDIO, that is it.
Click the connection to use the Bluetooth function Already.
Specifications:
Maxpower output
50W*2 4Ωload
Frequency Range
20Hz-20kHz(±3dB)
Headphone Maxpower output
(Headphone Version)
70mW 32Ωload
THD
OUTPUT=1W 0.01%
headphone matching
impedance
16-64Ω
SNR
≥98dB
Speakermatching impedance
4-8Ω
Dimension
L118.5*W98*H33MM
Working voltage
DC12-24V
Bare Weight
0.36Kg
Input Sensitivity
0.2mV
PackageDimension
L257*W215*H65MM
Frequently Asked Questions:
Q: All cables are connected, but no sound output?
A: 1. Check if the POWER indicator is on, and turn on the POWER if it is not on.When the indicator light is still
not on after turn on the power, you can find a laptop power and connect to test whether it is the machine fault
or a power failure.
