Kenwood Cooking Chef KM070 Series, Руководство пользователя

Страница: 16 / 164

���
cleaning and service
care and cleaning
●
Always switch off and unplug before cleaning.
●
A little grease may appear at
outlet ���
when you first use
it. This is normal - just wipe it off.
●
The metal surfaces of the temperature sensors may show signs of wear
during normal use. this does not affect the performance of the product.
●
Do not leave the high temperature flexible beater fitted to the mixer
when not in use.
appliance, outlet covers
●
Wipe with a damp cloth, then dry.
●
Never use abrasives or immerse in water.
high temperature flexible beater
●
Always remove the flexible wipers after use for cleaning and
storage: Firmly pull and twist each wiper until it slides off the
stainless steel beater arm.
●
To clean the stainless steel beater arm simply remove the flexible wipers
and wash by hand in hot soapy water and dry thoroughly.
The flexible wipers should be cleaned immediately after use by
hand in hot soapy water. Use the cleaning brush supplied to clean
INSIDE each wiper. Rinse the flexible wipers under hot running
tap water and dry thoroughly.
●
To refit the flexible wipers, lubricate the stainless steel beater arms with
a small amount of fresh cooking oil. Slide the flexible wipers onto the
stainless steel arm. Ensure each wiper covers the full length of the arm
and is past the tip at the end. Repeat the process for the second wiper.
Note: the tool should only be used with both wipers fitted.
bowl, tools, splashguard
●
Wash by hand, then dry thoroughly or wash in the dishwasher.
●
Never use a wire brush, steel wool or bleach to clean your
stainless steel bowl. Use vinegar or a suitable descaler to remove
limescale.
●
If food sticks or burns on the inside of the bowl, remove as much as
possible using the spatula provided. Fill the bowl with warm soapy water
and allow to soak. Remove any stubborn deposits using a nylon brush.
●
Any discolouration of the bowl will not affect its performance.
drain hole
●
Ensure this area is free from food. If necessary use a pipe cleaner
or cotton bud to clean.
temperature sensors
●
Wipe with a damp cloth then dry thoroughly. Never use abrasives or
sharp instruments to clean the sensors.
service and customer care
●
If the cord is damaged it must, for safety reasons, be replaced
by
KENWOOD
or an authorised
KENWOOD
repairer.
If you need help with:
●
using your machine
●
servicing or repairs
Contact the shop where you bought your machine.
●
Designed and engineered by Kenwood in the UK.
●
Made in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste collection
centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
16