41
The appliance must be connected to the electrical network verifying above all that the
voltage corresponds to the value indicated on the specifications plate and that the cables
section of the electrical plant can bear the load which is also indicated on the plate.
It is recommended that the appliance is connected directly to the mains by fixed wiring,
placing a double pole switch with minimum opening between the contacts of 3 mm.
The power supply cable must not touch the hot parts
and must be positioned so that it does not exceed
75°C at any point.
Once the cooker has been installed, the switch must
always be accessible.
ELECTRICAL FEEDER CABLE
CONNECTION
WARNING: The power supply cable must be
connected only by an authorised service agent in order to avoid a hazard.
To connect the feeder cable to the cooker it is necessary to:
•
Remove the 2 screws that hold shield “
A
” behind the cooker.
•
Open completely the cable clamp “
D
”.
•
Insert the feeder cable into the cable save “
P
”. The supply cable must be of a suita-
ble size for the current requirements of the appliance; see the section “Feeder cable
section”.
•
Connect the phase, neutral
and earth cables to terminal
“
B
” according to figures 11.1
and 11.2.
•
Pull the feeder cable and block
it with the cable clamp “
D
”.
•
Re-mount shield “
A
”.
Note: The earth conductor must
be left about 3 cm longer than the
others.
FEEDER CABLE SECTION
TYPE H05RRF
230 V~ 3 x 2.5 mm
2
(*) Connection with wall box connection
230 V
PE
N
L
1
(L
2
)
PE Earth
N
Neutral
L
Live
P
D
B
A
Fig. 11.2
Fig. 11.1
11 - ELECTRICAL INSTALLATION
IMPORTANT: The cooker must be installed in accordance with the manufacturer’s
instructions. Incorrect installation, for which the manufacturer accepts no respon-
sibility, may cause damage to persons, animals and things.
The connection of the appliance to earth is mandatory. The manufacturer declines
all responsability for any inconvenience resulting from the inobservance of this
condition.
Before effecting any intervention on the electrical parts of the appliance, the con-
nection to the network must be interrupted.
Содержание CK 700 A
Страница 23: ...23 S F C T Fig 8 1 Fig 8 2 A B T S Fig 8 3 Fig 8 4 Fig 8 5 ...
Страница 44: ...Code 1103855 ß2 ...