39
REPLACEMENT OF THE INJECTORS
OF THE COOKTOP BURNERS
If the injectors are not supplied they can
be obtained from the “Service Centre”.
Select the injectors to be replaced accor-
ding to the “Table for the choice of the in-
jectors”.
To replace the injectors proceed as fol-
lows:
•
Remove pan supports and burners
from the cooktop.
•
Using a wrench, substitute the nozzle
injectors “
J
” (figs. 10.3, 10.4) with tho
-
se most suitable for the kind of gas for
which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
F
J
Fig. 10.3
Fig. 10.5
ADJUSTING OF THE MINIMUM OF
THE TOP BURNERS
In the minimum position the flame must
have a length of about 4 mm and must re-
main lit even with a quick turn from the ma-
ximum position to that of minimum.
The flame adjustment is done in the fol
-
lowing way:
•
Turn on the burner.
•
Turn the tap to the MINIMUM position.
•
Take off the knob.
•
With a thin screwdriver turn the screw
“
F
” until adjustment is correct (fig.
10.5).
Normally for LPG, tighten up the regu-
lation screw.
J
Fig. 10.4
Auxiliary,
Semi-rapid and
Rapid burners
Triple-ring burner
CONVERSION TO NATURAL GAS OR TO LPG
Содержание CK 700 A
Страница 23: ...23 S F C T Fig 8 1 Fig 8 2 A B T S Fig 8 3 Fig 8 4 Fig 8 5 ...
Страница 44: ...Code 1103855 ß2 ...
