Kenwood CK 408, Инструкция по эксплуатации

Страница: 31 / 36

31
CONNECTING THE FEEDER CABLE
To connect the feeder cable to the cook-
er it is necessary to:
– Remove the two screws that hold
shield A behind the cooker.
– Open completely the cable clamp D.
– Insert the mains cable (see FEEDER
CABLE SECTION) into the cable
clamp D.
– Connect the phase and earth cables
to terminal B according figure 10.2
and 10.3.
– Pull the feeder cable and block it with
the cable clamp D
– Re-mount shield A.
N.B. The earth conductor must be left
about 3 cm longer than the others.
A
D
B
Fig. 10.1
PE
1 2 3 4 5
N (L
2
) L
1
230 V
Fig. 10.2
2 3 4 5 1
230 V ~
N(L
2
)
PE
L1
Red
or
Brown
(Live) Black
or
Blue
(Neutral) Green
and
Yellow
(Earth)
Fig. 10.3
PE Earth
N
Neutral
L Live
FEEDER CABLE SECTION
“Type H05RR-F or H05VV-F”
230 V 3 x 4 mm
2
(**)
240 V 3 x 6 mm
2
(**)
(**) Connection with wall box connection.
– Diversity factor applied
– A diversity factor may be applied to the
total loading of the cooker only by a suit-
ably qualified person