42
J
REPLACEMENT OF THE INJEC-
TORS OF THE TOP BURNERS
If the injectors are not supplied they can
be obtained from the After-Sales Service.
Select the injectors to be replaced accor-
ding to the “Table for the choice of the
injectors”.
To replace the injectors proceed as follows:
•
Remove pan supports and burners
from the cooktop.
•
Using a wrench, substitute the nozzle
injectors “
J
” (figs. 9.4, 9.5) with those
most suitable for the kind of gas for
which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
F
J
Fig. 9.4
Auxiliary,
Semi-rapid and
Rapid burners
Triple-ring burner
Fig. 9.6
ADJUSTING OF THE MINIMUM OF
THE TOP BURNERS
In the minimum position the flame must
have a length of about 4 mm and must re-
main lit even with a quick turn from the ma-
ximum position to that of minimum.
The flame adjustment is done in the fol
-
lowing way:
•
Turn on the burner.
•
Turn the tap to the MINIMUM position.
•
Take off the knob.
•
With a thin screwdriver turn the screw
“
F
” until adjustment is correct (fig. 9.6).
Normally for LPG, tighten up the regu-
lation screw.
Fig. 9.5
CONVERSION TO NATURAL GAS OR TO LPG
Содержание CK 314 A
Страница 22: ...22 S F C T Fig 7 1 Fig 7 2 A B T S Fig 7 3 Fig 7 4 Fig 7 5 ...
Страница 48: ...Code 1103858 ß2 ...