Kenwood 500, Инструкция по эксплуатации

Страница: 8 / 24

8
3 - CLEANING AND MAINTENANCE
GENERAL ADVICE
✓
Before you begin cleaning you must ensure that the hob is switched off.
✓
Allow the appliance to cool down before cleaning.
✓
Avoid leaving acidic substances (lemon juice, vinegar etc.) on the surfaces.
ENAMELLED PARTS
✓
Clean the enamelled parts with a sponge and soapy water only or another non-abra-
sive products.
✓
Dry preferably with a chamois leather or soft cloth.
If acidic substances such as lemon juice, tomato sauce, vinegar etc. are left in contact
with the enamel for a long time they will damage the surface.
STAINLESS STEEL ELEMENTS
✓
Stainless steel parts should be rinsed with water and dried with a soft and clean cloth
or with a chamois leather.
✓
For persistent dirt, use specific non-abrasive products available commercially or a little
hot vinegar.
✓
Note: regular use could cause discolouring around the burners, because of the
high flame temperature.
✓
WARNING
When correctly installed, your product meets all safety requirements laid down for this
type of product category. However special care should be taken around the under-
neath of the appliance as this area is not designed or intended to be touched and may
contain sharp or rough edges, that may cause injury.