Kenwood 500, Инструкция по эксплуатации

Страница: 15 / 24

15
Fig. 5.2
GAS CONNECTION
Connection to the gas main must be per-
formed by a qualified technician, in com-
pliance with the current laws in force.
The cooktop is set up and calibrated to
work with the gas indicated on the rating
plate affixed to the appliance and on this
instruction booklet.
The gas supply system must conform
to the local regulations in force.
Connecting to gas mains:
✓ Cat:
II
2H3+
GASES
The gases used for the operation of
cooking appliances may be grouped by
their characteristics into two types:
✓
Butane/Propane gas
(in cylinders)
G30/G31
✓
Natural gas G20
GB
5 - GAS SECTION
1/2" G
conical
Fig. 5.1
F C A
The cooktop connection (fig. 5.1) is
made up as follows:
✓
nut “A”
✓
gasket “F”
✓
1 conical elbow “C”
Connection to the gas main must be
performed by a qualified technician, in
compliance with the current laws in
force.
The gas inlet union can be turned in the
direction required after the union
elbow C - nut A connection has been
slackened (Fig. 5.2).