Rev
F
: 01/2015
3 PHASE – SAME MOTOR AND CONTROL VOLTAGE, w/o ATD
NOTES:
1. DO NOT ATTEMPT OR MAKE RAPAIRS ON THE MACHINE WHILE POWER IS ON.
2. ALL ELECTRICAL WORK MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN.
3. THE ELECTRICAL DIAGRAM SHOWS THE MACHINE IN THE “OFF” POSITION.
4. THE GROUND WIRE (GREEN) OF THE POWER CABLE IS CONNECTED TO THE FRAME
OF THE MACHINE.
To obtain the correct Kentmaster part number for 3-pole contactor and overload
relay, please contact the Kentmaster representative.
Figure
18
WIRING DIAGRAM – same control and motor voltage, w/o ATD
Page 19 of 26
