ARHC-1
REV B: 08/13
AIR MOTOR ASSEMBLY
Figure
9
6210800: AIR MOTOR ASSEMBLY
MOTOR DISASSEMBLY
1. TO DISASSEMBLE, PRESS ROTOR, ITEM 10, OUT THRU BEARING, ITEM 1. MOTOR ASSEMBLY SHOULD
SLIDE APART.
2. TO SEPARATE ADAPTOR FROM ROTOR, ITEMS 8 AND 10, REMOVE BLADES, ITEM 4. INSERT A PIECE OF
MATERIAL ABOUT .06" THICK (1.5mm) INTO BLADE SLOT. IT SHOULD EXTEND ABOUT 1/2" (12mm) ABOVE
ROTOR SURFACE. PLACE IN VISE WITH
SOFT JAWS
. THIS WILL PREVENT ROTOR FROM TURNING WHEN
REMOVING ADAPTOR WITH A WRENCH.
3. PRESS ROTOR, ITEM 10, OUT OF BEARING, ITEM 2.
MOTOR REASSEMBLY
1. CLEAN AND LUBRICATE ALL PARTS.
2. REPLACE PARTS AS NEEDED.
3. REASSEMBLE PARTS IN REVERSE ORDER.
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016
UNITED STATES OF AMERICA
TELEPHONE: (626) 359-8888 FAX: (626) 303-5151
10 OF 13
6210800: MOTOR ASSEMBLY
ITEM PART #
DESCRIPTION
QTY
1
3072380 BEARING
1
2
3122000 BEARING
1
3
6201590 PLATE, REAR BEARING
1
4
6211520 BLADE, MOTOR
6
5
6211540 SPACER, ROTOR
1
6
6211550 PLATE, FRONT BEARING
1
7
6211560 SHIM
2
8
6211570 GEAR
1
9
6211610 CYLINDER
1
10
6211710 ROTOR – 6 VANES
1
11
8611540 ROLL PIN
1
12
8611600 ROLL PIN
1
