KENT Nordco KF3BM, Руководство пользователя, Страница: 16 / 36

Section B – Page #6 NOV/2005
Disassembly Procedures (Continued):
5.
Using a spanner wrench (Nordco
P/N 4011560), insert the 4 pins
on the wrench into the matching
holes at the bottom of the
accumulator. This may require
tapping the wrench pins – with
the hammer butt - into their
corresponding holes.
6.
Gently tap a 4# hammer on the
wrench handle, moving it in a
counterclockwise (CCW)
direction. This is done only until
the accumulator body has been
loosened to the point you can
turn it by hand. At this point
remove the spanner wrench by
gently tapping up with the
hammer butt. Be careful not to
use too much force to remove
wrench. This may strip the
threads on the accumulator body.
7.
Remove the body and
diaphragm. Dispose of the
diaphragm.