background image

1

WARNING: DO NOT COVER in order to 

avoid overheating.

To reduce the risk of fire, electrical shock or 

injury to persons or property:
•  To avoid overheating, keep airflow grilles  

clear of dust and hair build up - especially  

if you have indoor pets. 

•  Use only the voltage specified on the rating  

label of the appliance. 

•  Do not cover or restrict airflow to the 

inlet or outlet grilles in any manner as the 

appliance may overheat and become a fire 

risk. 

•  Do not cover grilles, block entry or exits of 

airflow by placing the appliance against    

any surface. Keep all objects at least 1    

metre from the front, side and rear of the   

appliance. 

•  Do not locate in areas of high foot traffic,   

ensure the power cord and heater are in    

view to avoid accidents.

•  Do not operate in areas where gasoline,  

paint or other flammable liquids are used 

or stored. 

•  This appliance heats up when in use. To  

avoid burns, do not touch the front of the   

appliance or any of the grilles or vents. 

•  Before moving the appliance, switch off the  

appliance by unplugging it from the wall    

and allowing it to cool. 

•  Do not use the appliance to dry clothes. 

Congratulations on your purchase of a Kent 

Portable Electric Appliance. Please read the 

following instructions carefully before use and 

retain for future reference.

BEFORE FIRST USE

•  Read and follow all the instructions below   

even if you feel you are familiar with the    

appliance.

•  Remove the packing and make sure that  

the appliance is in tact. If in doubt do not   

use the appliance and contact the place of  

purchase. 

•  Do not leave packaging materials such as  

bags and staples within reach of children. 

•  Dispose of packaging carefully and with    

consideration for the environment.

•  It is ideal to retain the appliance carton for 

seasonal storage.

For your convenience record the date you 

received the appliance on the warranty page 

of these instructions, and attach your proof of 

purchase. Retain this information in the event 

that a warranty service is required.

NOTE:

 The rating of this appliance (as 

marked on the rating label) is based on 

specific loading tests. Normal use or the use 

of other recommended attachments may draw 

significantly less power.  

 

IMPORTANT SAFETY INFORMATION

When using any electrically powered 

appliance, these basic safety precautions 

should always be followed.

4091-11/14

OWNERS INSTRUCTION MANUAL

MICA PANEL HEATER

Model No. KPE216-147

Содержание KPE216-147









Отзывы: