KENT KPE216-147, Инструкция пользователя

Страница: 5 / 8

5
SAFETY FEATURES
Over-Heat Protection
• This heater is protected with an over-heat
protection cut-out facility that switches it off
automatically if it over-heats.
• Overheating can be caused by obstruction
to the air intakes on the back of the heater
or the grill on the front.
• If this occurs please disconnect the heater
from the power socket and allow it to cool
for 30 minutes. Remove any obstruction
and turn the heater back on.
• The heater should operate normally.
Should the problem persist contact your
nearest service centre.
Safety Cut-Out Switch
• The heater is fitted with a safety cut-out
switch to switch the heater off if it is
knocked over.
• If the heater is knocked over and the
cut-out switch activates turn the heater off
at the power outlet and take EXTREME
care when standing the heater upright as it
will still be hot.
• Inspect the heater for damage especially to
the heating elements and supply cord.
• If any damage is visible do not operate the
heater.
Timer Function
• To set the number of hours the heater will
run before automatically switching off press
the timer select button ( ) then press the
setting adjustment buttons (+) or (-) to add
0.5 hours or reduce 0.5 hours between the
range of 0-18 hours).
• Once the desired time is set wait 5
seconds, the heater will exit the timer
function and return to normal operation. To
view the time set at any time, press the
( ) button.
Memory Function
• When the heater is switched to STANDBY
the last thermostat temperature will be
retained in the heater’s memory the next
time the heater is switched ON, unless
the heater switched OFF using the power
switch.
Note: The timer setting is not retained.
Remote Control
• The remote control duplicates all the
controls that are on the control panel.
Please refer to the above instructions for
operation.