4
OPERATING INSTRUCTIONS
NOTE
: When switched on for the first time
a slight odour may be emitted for a few
minutes. This is harmless and occurs with most
appliances as slight traces of dust or lubricants
may have collected during manufacture.
•
If not wall mounted, fix castors to base
supports (refer to Portable Assembly on
page 3), and place the heater on a level
surface in a stable upright position.
• Ensure the Power Switch is OFF.
• Unwind the power cord and plug your
heater into a power socket (refer to
Positioning of the Heater on page 3).
Ensure the voltage on the specification plate
is the same as in your home and the power
cord is lying safely on the ground.
• Turn the heater ON by pressing the power
switch, the digital display will flash briefly
and the power light ( ) will light up.
• Press the standby button to switch the
heater fully ON. The digital display will
show the room temperature and the power
setting symbols will light up (it defaults to
HIGH power). The heater defaults to a
thermostat setting of 25°C.
• To switch the heater OFF, reverse the above
procedure. Turn the power OFF at the wall
to fully switch off the heater.
Power Selection
• To select the LOW power option, press the
setting adjustment button (-), only the small
blue ‘low power’ light will light up on the
digital display.
• To select the HIGH power option press the
setting adjustment button (+). Both blue
lights will light up to indicate ‘high power’.
LOW Power HIGH Power
KPE216-146
1000W
1500W
KPE216-147
1200W
2000W
Thermostat Function
• Press the temperature select button ( ),
the current thermostat setting will flash then
it will return to display the current room
temperature.
• Press the setting adjustment buttons, (+) or
(-) to add 0.5°C or reduce 0.5°C between
the range of 5°C to 36°C.
• Once the desired temperature is set wait 5
seconds, the heater will exit the thermostat
function and return to normal operation.
The current room temperature will be
displayed. To view the set temperature at
any time, press the ( ) button.
Note:
The heater’s digital thermostat reads
the temperature immediately around the
heater. Actual average room temperature may
vary to the reading showing on the digital
display of the heater.
High Power
Setting Adjustment (Down)
Setting Adjustment (Up)
Power Light
Low Power
Temperature Select
Timer Select
Standby
Power Switch
