2
Chapter One Installation Guidelines
General Safety Rules
Do
1. The employer must select trained and qualified personnel to operate machinery.
2. The employer must adhere to local national safety laws and regulations when
teaching operators safety and cleanly procedures.
3. The employer must inform operators to look out for unsafe operating practices.
4. The brightness of the lighting equipment in the workplace must conform to local
government regulations.
5. The machine's fire extinguisher must use non-conducting CO_2 or ABC.
6. The operation manual, instructions, and warning labels must be read before
operating the machine.
7. The operation manual must be kept ready at all times. If an accident occurs, please
contact our company representatives.
8. Hair must be properly restrained. Wear a hat if necessary before operating or
maintaining the machine.
9. Before operating the machine, safety glasses, a filter mask, and work safety shoes
must be worn.
10. The machine and its surrounding area must be kept clean and orderly to prevent
slippery surfaces and unnecessary obstacles.
11. The operator must remain at least 600 mm away from the machine to prevent
contact with the machine and injury. A yellow line should be drawn to mark areas
where personnel are restricted from entering.
12. Operation and maintenance personnel must only work within the designated safe
areas.
13. When moving work pieces that exceed 30 kilograms, use a hoist operated by
licensed personnel to lift and lower these pieces.
14. All protective guards and doors must be closed at all times, except when
maintenance work is being done.
15. Before conducting any maintenance work, the power source should be turned off
and only proper tools should be used.
Don't
1. Persons wearing ties, long sleeves, or loose fitting clothing should not operate or
maintain the machine.
2. Persons within the work area must not lean on the machine while it is running.
3. When the machine is running, the wheel guard, right and left storke adjusters, and
nozzles must not be adjusted by hand or with tools.
4. To prevent eye injury to personnel by dust particles, compressed air should not be
used to clean the machine.
1.1 Safety rules for this machinery
Property
of
Kent
Industrial
USA
Please
Do
Not
Reproduce