KENT C4-100A, Руководство по техническому обслуживанию и ремонту

Страница: 4 / 44

INTRODUCTION
BEFORE YOU USE YOUR OWNER'S MANUAL, PLEASE READ THIS INTRODUCTION ALL
THE WAY THROUGH.
WHEN THE MACHINE IS DELIVERED:
Check the carton carefully for signs of damage and rough handling. Remove the machine from the carton.
If the machine is damaged, notify the carrier immediately and request an inspection. Be sure to keep the
carton, packing list and carrier's receipt until the inspector has verified your claim.
Kent Investment's liability ceases when the shipment is picked up by the carrier, but our customer service
staff will be glad to furnish any information needed in connection with the claim and will expedite repair of
the machine.
BEFORE OPERATING THE MACHINE
Read the manual carefully before operating Model C-4. The manual has important information for the use
and safe operation of the machine. Keep this manual handy at all times. Model C-4 will assure years of
satisfactory service if operated and maintained according to recommendations in this manual. If additional
technical information is needed, please contact Kent Investment Corporation at 870.994.3535.
All information and specifications printed in this manual and parts list are current at the time of printing;
however, because of Kent Investment's policy of continual product improvement, we reserve the right to
make changes at any time without notice.
WARRANTY:
See page 5 of this manual for limited warranty.
THIS MACHINE IS FOR COMMERCIAL USE.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING MODEL C-4.
GENERAL INSTRUCTIONS
This floor finishing machine shall be grounded while in use to protect the operator from electric shock. The
machine is provided with a three-conductor cord and a three-contact grounding type attachment plug to fit
the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the
grounding wire. NEVER connect this wire to other than the grounding pin of the attachment plug.
1