High-pressure cleaners. Batch - 92/9300 - ST 1500
Date: 18/4-2017
Instruction manual
Page:
29 of 36
Kent hojtryk\Clean-9200-9300-1500\Brugs-9200-6300-1500-EN-c.doc
4 Installation and assembly
The machine must always be lowered with
extreme
caution.
Installation:
The machine must be safely placed on a flat, levelled surface, in horizontal position.
4.1 Unpacking:
Unpack the machine and make sure that it is complete and not damaged. In case it is not complete or
damaged, do not use the machine and consult your dealer. For reasons of packaging or transport some
accessory components can be supplied loose. In this case they must be assembled according to the
instructions in this manual.
Make sure that the components of the packaging (bag, boxes, components for fastening) are placed out
of the reach of children.
Identifikation Label:
Before using the machine, make sure that it is provided with the identification Label. In case the iden-
tification Label is missing, do not use the machine and consult your dealer immediately. The identification
Label with the technical specifications is applied on the machine.
4.2 Flytning:
Lifting by crane is carried out as shown with lifting
bracket No. 196654.
This can be purchased from Kent Højtryksrensere.
NEVER LIFT BY WEAK STRUCTURAL PARTS.
The lift must be carried out with unplugged power plug.
Lifting by truck must only take place if the high-pressure cleaner is
secured on a transportation pallet.
Weight: approx. 95 – 105 kg. See next page.
Ensure that there is free access on the transportation route without
any persons or obstacles.
Model may differ from shown
