INSTRUCTION MANUAL FOR USE AND MAINTENANCE
2
08812946(3)2003-08
INTRODUCTION
PURPOSE AND CONTENTS OF THIS
MANUAL
The purpose of this manual is to provide the User with
all necessary information to use the machine properly
in a safe and autonomous way. It contains information
about technical characteristics, operation, machine
inactivity, maintenance, spare parts and safety condi-
tions.
Before carrying out any procedure on the machine, the
Operators and Technicians in charge of the maintenan-
ce must read this manual carefully. Contact
Kent/Euro-
clean Service Center
in case of doubts regarding the
interpretation of the instructions and for any further in-
formation.
TARGET
This manual is intended for the Operator and the Tech-
nicians qualified for the machine maintenance.
HOW TO KEEP THIS MANUAL
The Use and Maintenance Manual must be kept near
the machine, inside an adequate case, far from liquids
and other substances that can cause damage to it.
IDENTIFICATION DATA
The Machine Model and Serial Number are marked
on the plate on the tank and can be read from the
outside. (1, Fig. C).
The machine production year is shown after the Date
Code on the serial plate (A02 means January 2002).
This information is useful when requiring machine re-
placement parts. Use the following table to write down
the machine identification data for any further referen-
ce.
OTHER REFERENCE MANUALS
– Electronic Battery Charger Manual, that is to be
considered as integral part of this manual.
Moreover, the following manuals are available:
– Service Manual (that can be consulted at the
Kent/Euroclean Service Center)
– Spare Part List,
supplied with the machine
SPARE PARTS AND MAINTENANCE
All necessary use, maintenance and repair procedures
must be carried out by qualified personnel or by a
Kent/Euroclean Service Center
. Only original spare
parts and accessories must be used.
Call
Kent/Euroclean
for service or to order spare parts
and accessories, specifying the machine Model and
Serial Number.
MODIFICATIONS AND IMPROVEMENTS
Our Company constantly improves its products and re-
serves the right to make changes and improvements at
its discretion without being obliged to apply such bene-
fits to the machines previously sold.
Any modifications and/or accessory adding must be ap-
proved and performed by the Manufacturer.
SAFETY - ACCIDENT PREVENTION
The following symbols indicate potentially dange-
rous situations. Always read carefully this informa-
tion and take the necessary precautions to protect
people and objects.
No accident prevention program is effective without the
total cooperation of the person responsible for the ma-
chine operation. Most of the accidents that may occur
in a factory, while working or transferring, are caused
by the failure to comply with the simplest prudence ru-
les. A careful and prudent user is the best guarantee
against accidents and is the prerequisite to carry out
the prevention program.
MACHINE model.................................................
MACHINE serial number.......................................
https://harrissupplyind.com - To Order Parts Call 608-268-8080
