8
- FORM NO. 56041563 / Rainmaker
™
H
I
O
O
I
O
I
I
O
212° F
➃
➃
➃
➃
➃
➅
➅
➅
➅
➅
➀
➀
➀
➀
➀
➁
➁
➁
➁
➁
➂
➂
➂
➂
➂
➄
➄
➄
➄
➄
SWITCH PLATE DESCRIPTIONS
Locator Light (1) -
This green light will turn on when the two power cords are plugged into separate
circuits. Separate circuits are defined as outlets fed by circuit breakers on opposite sides of the
circuit breaker panel. This feature helps to prevent blown breakers. When the locator light (
1
) turns
on, the heat exchanger will automatically turn on. If you can not get the locator light to turn on, use
the Heat Switch (
2
) to turn the heat exchanger on.
Heat Switch (2)
- This rocker switch turns the heat exchanger on and off, when the Locator light (
1
)
is not on. The switch will light when ON.
Mode Light (3)
- This indicator light will turn on while the heat exchanger is actively heating. It will
turn off when the heater has reached operating temperature. Normally, this light will be on most of
the time as you do your job, but it may go out if you stop cleaning to move furniture or to empty or fill
the tanks.
Vacuum 1 Switch (4)
- This switch turns one vacuum on and off. The switch will light when ON.
When operating with only one vacuum -- as when cleaning delicate fabric -- use Vacuum 1. When
cleaning carpet, use both Vacuum 1 and Vacuum 2 (
5
).
Vacuum 2 Switch (5)
- This switch turns the second vacuum on and off. The switch will light when
ON. Use this switch when you want maximum vacuum lift. The CFM of both motors is the same as
it is for one motor alone, since the vacuums are operated in parallel; however, the vacuum lift
doubles when both vacuums are running.
Pump Switch (6)
- This switch turns the pump on and off. The switch will light when ON.
The pump in this machine is a “demand” style pump. This means the pump only runs when you are
actually spraying. Once spraying stops, the pump stops running.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
