333 Twin Dolphin Drive, 6
th
Floor
Redwood Shores, CA 94065
kensington.com
change the setting, right click the Bluetooth Service, select Properties. Select start-up
type to Automatic, see below:
Select Apply, and OK. If all Bluetooth Services are set to Automatic, reboot your
computer to complete the change.
If you are still experiencing trouble pairing this device, an update to Bluetooth Drivers
may be needed.
The device is paired in Windows, but then stops working. What is going on?
There are two locations on your Windows device where settings need to be modified.
1. The first setting for the Human Interface Devices
From y
our system’s Device Manager, go to Human Interface Devices and select
Bluetooth Low Energy GATT Compliant HID Device, right click and select Properties.