MK-17
kg
218*154*234mm
recommended that you fill to the maximum level with fresh tap water, boil and
℃
.
down until it clicks into place on the top of the kettle.
appl
ia
nce will emit an audible beep sound, the
LED
display light will illuminate for
approximately
2
seconds and will then go into the standby mode. The LCD
display
wi
ll show the current water temperature.
NOTE:
During 'standby' and 'operational' modes, pressing the
"+" and "-" button
s, can
vary
the temperature between 50~100
5
SPECIFICATIONS
HOW TO USE
1
3
4
In stand by, press the
start
/
stop
button
and the LCD display will show the previous
selected temperature. To boil to
100
℃
, press the "+" button until it displays 100
.
The k
ettle
will
start heating
and the L
ED
display light
(red on the start / stop button)
will
remain on. Once the water temperature
reaches
the preset temperature,
3
audible beeps will be heard and then
the kettle will
enter
the 'keep warm' state.
During 'keep warm' state, the kettle can only heat to a maximum of 90
℃
and will
remain active for 2 hours, after which time the kettle will switch off.
At the end of the 'keep warm' state, the display will turn off and 3 audible beeps will
be heard. When the start/ stop button is pressed again, the LED display light will
illuminate and the LCD display will show the previous selected temperature.
The kettle will start heating
i
f it is below the selected temperature and will then
enter the keep warm state.
During water heating / boiling stage, the
start
/
stop
button can be pressed to cease
o
peration and revert to the standby mode.
During the 'keep warm' state, you can press the
start
/
stop
button once, the
kettle
will
cease the heating and revert to the 'standby' mode.
2