Instructions:
Insert stem with brew through lid into
server and twist to tighten.
Screw lid to the left to remove brew
through lid from brew through spout.
After brew is complete put on lid and twist
to the right to tighten to transport and or
retain heat.
BUNN
®
1.5 GALLON
THERMAL SERVER
EQUIPMENT INFORMA
TION
1
On this card you will find directions for operating, cleaning and repairing minor problems you may
have with your Thermal Server. By regularly cleaning your servers and using the trouble shooting
guide you will ensure consistent quality in the cup with little or no downtime.
Always pre-heat server(s) with hot water for at least 10 minutes before using.
Rinse inside of server between each batch. Or at the end of the day run a batch into server
without coffee and close lid and server is ready to go the next morning.
2
1
3
