8
9
2
3
Unlocking Your KeyFolio
1
2
3
180°
Charge the Battery
Charge your KeyFolio before initial use or when the
Charging Indicator
blinks green.
1
Insert the small end of the
Charging Cable
into the
micro USB Charging Connector
on
the Keyboard.
2
Insert the other end of the
Charging Cable
into your iPad charger.
3
Plug your iPad charger into a working outlet. The
Charging Indicator Light
glows red.
4
When the Keyboard is fully charged, the
Charging Indicator Light
turns off.
Troubleshooting
I can’t connect the Keyboard to my iPad.
Try the following in sequence. You can stop when the problem is fixed.
1
Make sure you have installed and set up Bluetooth correctly on your iPad. Check the
documentation that came with your iPad for instructions.
2
Make sure that the Keyboard is within range of your iPad. Maximum Bluetooth range is
about 10 meters/33 feet.
3
If your iPad is connected to other Bluetooth devices, you may need to disconnect some
devices before you can connect to the Keyboard.
4
If you changed any Bluetooth settings on your iPad, try connecting the Keyboard to
your iPad again.
5
Make sure that both your iPad battery and the Keyboard battery are sufficiently
charged.
If this does not solve the problem, please contact Kensington Support at
kensington.com
.
Technical Support
Technical support is available to all registered users of Kensington products. Technical
Support contact information can be found on the back page of this manual.
Содержание KeyFolio SecureBack
Страница 3: ...4 5 4 a b Folding 1 2 a b 3 4 ...