Fig 8.3.3 GUI main interface
Output card resolution setting
Enter the GUI main interface, select "Settings" option, as shown in Fig 8.3.3, and then
select the "resolution settings" option, then select one output card, the resolution can be
set. For example, to set the "27" output card resolution, click on drop-down arrow of
channel "27" card , select the appropriate resolution is ok.
Output card signal output mode change
Enter the GUI main interface, select "Settings" option, as shown in Fig 8.3.3, and then
select "port settings "option,as shown in figure 8.3.4, select one output card,can change
this card output mode to VGA/YPbPr/CVBS,and the change is completed by clicking "OK"
(valid to ADM-HSDA-OUT card).
