8
Home / MODE: No memory card
If there is no memory card inserted into the device,
a warning icon will be shown on screen when
entering the main menu. A memory card is not
essential to operation, as the scanner has an internal
memory of 97 MB, however depending on size and
resolution of scans, this could fill up quickly.
1. Capture
After the welcome page, one of the menus pictured on page 7 will appear,
depending on whether you are in film scanner or photo scanner mode. You can
use the LEFT and RIGHT buttons for the desired menu item, then press the
ENTER button to confirm your selection.
1.1 Capture: Adjust brightness and colour of image
The brightness and colour of the image will
be adjusted automatically when captured,
but if you wish to make further adjustments,
you can.
In capture mode, press the ENTER button to
bring up this screen (pictured, right):
EV means brightness; R means red, G
means green, B means blue. Each can be
adjusted individually up to +/- 2.
1.2 Capture: Mirror / flip
If an image has been loaded
incorrectly, it is possible to mirror
or flip it before capturing. The view
will be adjusted accordingly. Mirror
and flip functions can only be used
while in the live view mode.
Press the LEFT key to mirror the
image (horizontal).
Press the RIGHT key to flip the
image (vertical).
Press the ENTER button to switch between EV, R, G and B. Press LEFT / RIGHT
buttons to adjust the data.
Press the SCAN button to return to image preview mode.
Mirror
(LEFT key)
Flip
(RIGHT key)
