Kennedy EF-WM502, Руководство пользователя, Страница: 17 / 24

Page 17
08.19.20
Multi-functional Operating with Remote Control
Turning ON/OFF the appliance:
1.
2. Press the “
level.Ember bed color is white. Indicate “ON” on LED display. The heater is in OFF
status. Press again to turn off the fireplace. Indicate “OF” on LED display. LED
display for 5 seconds, then goes off.
Note: If power is not in OFF condition, shutdown by the remote control, then next
time turn ON by the remote control, the existing setting will resume to the previous
shutdown setting. The heater and timer is OFF
Changing LED
, Timer and heating
options:
1. Ensure steps 1-2 in “Turning ON/OFF the appliance” are previously
followed.
” button multiple times to cycle through 4 different brightness
” button multiple times to cycle through 4 different brightness
2. Press the yellow “
3. Press the blue “
4. Press the red “ ” button multiple times to cycle through 4 different brightness
6. Press the “ ” button multiple times to cycle through the colors of red (E1), pink
(E2), snow white (E3), cool blue (E4), dark blue (E5), green (E6), lake green (E7),
OFF and all-color automatic circulation (each color changing after 30 seconds)
(EE).
7. Press the “ ” button, heater ON/OFF. Press once, the heater is ON, ”HIGH”
temperature status with 2 groups of heating system turned ON at 1500W; press
again
,
the heater is OFF.
Press button for 5 seconds (heater lock/unlock function), the heater and related
keys will lock, displays “LO”; press the key again for 5 seconds, the heater will
unlock, displays “UL”. You will hear a “beep” sound when keys are pressed, but
9. Press the “
10. Press the “
” button, the heater turns on in LOW (H1) (750W).
Note: Steps 2-
1
can be done independently.
12. Press the “ " to activate the timer. Press once for 30 minutes Each additional press adds 1 hour to a
maximum of 8 hours. LED display shows 30-1H-2H-3H-4H-5H-6H-7H-8H-00
11. Press the “
0
” to preset the desired flame effect and one button return to preset stage. Press the key for 3
seconds to memorize the flame setting. When you want to return to preset stage, press the key once.
Only 1 memorized flame setting saves, so any new setting will override the previous setting. Indicator shows “PS”.
Display shows y4, y3, y2, y1 or y0 for off.
Display shows b4, b3, b2, b1 or b0 for off.
levels and OFF for the red flame LED s Display shows r4, r3, r2, r1 or r0 for off.
5. Press the middle “ ” button to turn on/off all flame colors and ember bed. If press off
and on again, the LED setting will resume to previous setting . ( F0) indicates all flame
colors OFF, (FF) indicate all flame colors ON.
” button, the heater turns o n in HIGH (H2) (1500W).
but can’t turn on and no response; if heater is in ON position, press “lock”, the heater will turn off, and related
temperature keys will lock and not response, only hear “beep” sound when press again. After heater and
related keys are locked, the flame and lighting will remain ON and controllable. If we press the key again for
5 seconds, the heater will unlock, and the heater is in OFF position, until user press any heating function.
If heater is ON, while flame lighting is OFF, indication will display heater current setting (H1 or H2) and will
not disappear, until flame lighting resumed.
To set temperature level, press " " for temperature setting, if room temperature is lower than temperature
setting, two groups of heating system will turn ON (indicate current temperature setting); press until both the
heating systems and the blower are OFF (indicate H0). NOTE: Celcius is the default temperature setting.
Press “ “ key for 5 seconds, hear a “beep” sound once, the indication will display “F” for 3 seconds. and
8.
2
“
remote button to turn on the red, blue and yellow flame at the brightest ”
Ensure steps 1-2 in the"Main Power Switch"procedure are first followed.
disappear, (indicate that Celsius degree has been changed to Fahrenheit degree). Celsius degree is
switched to associate Fahrenheit degree; the parameter is set to Fahrenheit degree of 61-66-70-73-77-80-86.
Temperature key only function when heater is ON.
The parameters is pre-set in degrees Celsius 16-19-21-23-25-27-30; Repeat circulation.
(E0).