- 15 -
You will need two people to lift this
microwave. Failure to use more than
one person could result in personal
injury.
1. Carefully lift microwave oven and hang it on support
tabs at the bottom of the mounting plate reaching
through upper cabinet. Thread power supply cord
through the power supply cord hole in the bottom of
the upper cabinet.
2. Rotate microwave upward so that top of oven is
against bottom of upper cabinet or cabinet frame.
See Figure27.
3. Drop the lock pin and washer assembly into hole
"N" and push pin down as far as it will go.
See Figure 28.
4. Place washers over two, 1/4"x3" bolts. Then insert a
bolt down through each hole in the upper cabinet
bottom.
Tighten the bolts until the gap between the upper
cabinet and microwave oven is closed.
See Figure 29.
5. If wall-vented or room-vented installation is used, go
to #8 on the next page.
STEP 6:
ATTACH THE OVEN TO THE WALL
w
w
WARNING
w
w
support tabs
washer
lock pin
Figure 27
Figure 28
Figure 29
