28
USING THE SELECT CLEAN™ SELF-CLEANING CYCLE
5.
After the oven is cool, wipe off any residue or ash
with a damp cloth or sponge.
If needed, touch up spots
with a mild abrasive cleanser
or cleaning sponge.
To delay start the Self-Cleaning cycle:
NOTE: Make sure the clock is set to the correct
time of day. (See “Setting the clock” in the “Using
Your Range” section, p. 12.)
1.
Press SELECT CLEAN.
Press pad twice, SoilA (for average soil) will
replace SoilL.
Press pad three times, SoilH (for heavy soil) will
replace SoilA.
NOTE:
You can scroll through all 3 settings
(SoilL, SoilA and SoilH) continuously by pressing
SELECT CLEAN.
2.
Press DELAY START.
3.
Set the start time.
Press the HOUR/MIN (
s
) or (
t
) pad(s) until the
correct time of day to start the SELECT CLEAN
Self-Cleaning cycle shows on the display.
4.
Press START/ENTER.
5.
Once Delay Start time has been reached, the
oven begins the SELECT CLEAN™ Self-Cleaning
cycle.
SETTING THE CONTROLS (contd.)
PRESS
YOU SEE
CLEAN
START
(example for 12:30 start time)
PRESS
YOU SEE
PRESS
YOU SEE
SELECT
CLEAN
CLEAN
(example shows light soil
setting)
PRESS
YOU SEE
ON
DELAY
CLEAN
LOCKED
YOU SEE
ON
HEAT
CLEAN
LOCKED
(example shows light soil setting)