15
16
Place the Condiment Basket on the right door inside
;
make sure to insert the legs of the Condiment Basket into the
brackets which were attached on the door inside shown as below.
Condiment basket
Bracket
Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the Electronic Ignition
Module. Total (4) connections.
Connect the two wires [(a) and (b)] from the switch wiring harness into the back of the Electronic Ignition Module.
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as (a),(b).
Total (2) connections.
ignition module
Electronic
Heat shield
Left side panel
A
B
Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart left
side panel with the nut, shown
A
.
Insert AA battery into ignition module, negative (
-
) end first. Then put on the cap, shown
B
.
Nut
-
+
AA battery
Cap
3
1
2
4
(a)
(b)
24 • 464222209