NOTE:
Make sure the exhaust filter
cover is properly installed.
3. Wash with cold water only, DO NOT
use detergent or soap. Allow to air dry.
Allow parts to dry 24 hours before
putting back into vacuum cleaner.
NOTE:
DO NOT operate without post-
motor filter installed.
DO NOT wash in the dishwasher.
DO NOT install the filter if damp.
5. Insert the exhaust filter cover tabs into
the upper slots and lock the exhaust
filter cover into place by pressing the
release tab under the cover until a click
is heard.
It is recommended to clean the HEPA
media exhaust filter with cold water every
year.
NOTE:
When the cleaning of the filter
no longer restores vacuum cleaner suction
to full power, or the filter is worn or broken,
replace the exhaust filter. To purchase the
exhaust filter, call 1-877-531-7321 (US) /
1-844-608-3081 (CA).
1. Remove exhaust filter cover by pulling
the tab outward at the bottom of the
cover.
4. Reinstall the HEPA media exhaust filter
into the vacuum cleaner.
2. Remove the HEPA media exhaust filter
from vacuum cleaner.
- 21 -
HEPA MEDIA EXHAUST FILTER CLEANING
HEPA
Media
Exhaust
Filter
Slots
Tabs
Содержание Lift-Up DU5080
Страница 76: ... MD ...