Kenmore Intuition BU4050, Инструкция по использованию и уходу

Страница: 26 / 84

Dust escapes
from vacuum.
HEPA media exhaust filter is
installed incorrectly. Check exhaust filter for correct installation.
Follow instructions on page 21-22.
The dust bag is worn or broken. Check and replace the dust bag.
Foam filter or HEPA media exhaust
filter is worn or broken. Check and replace the foam filter or the HEPA
media exhaust filter.
Brushroll does not
turn.
Handle is in fully upright position. Move handle from the fully upright position.
Brushroll On/ Off button is not
pressed to start the brushroll. Press the Brushroll On/ Off button to start the
brushroll.
Brushroll is jammed. Remove obstruction.
Brushroll is not installed correctly.
Call 1-844-608-3080 (US) / 1-844-608-3081
(CA) for assistance.
The belt is not routed correctly.
Call 1-844-608-3080 (US) / 1-844-608-3081
(CA) for assistance.
The belt is worn or broken.
Call 1-844-608-3080 (US) / 1-844-608-3081
(CA) for assistance.
Fault in PCB section of the
motorized nozzle. Call 1-844-608-3080 (US) / 1-844-608-3081
(CA) for assistance.
Overheat protector of the
motorized nozzle is activated. W ait the motorized nozzle to cool down, and
then restart.
Sound changes.
Exhaust filter cover is installed
incorrectly.
Position exhaust filter cover correctly and snap
firmly into place. Follow instructions on page
22.
Air path is blocked.
Check for and remove any clogs and clean the
air path. Follow instructions on page 23.
Attachments use restricts air flow.
Check attachments for fuzz, lint, pet hair or
other debris.
Vacuum turns off
on its own.
The power cord plug is loose from
the outlet when using the vacuum.
Reinsert the power cord plug fully into the
outlet. Avoid pulling or dragging the power
cord when using the vacuum.
Thermal protector is activated.
Turn the vacuum cleaner off and unplug it.
Check the air path and dust bag. Allow the
vacuum cleaner to cool for a minimum of 50
minutes. Plug in vacuum and turn it on.
The motor is damaged.
Call 1-844-608-3080 (US) / 1-844-608-3081
(CA) for assistance.
Brushroll status
indicator light
emits red.
There is a jam in the brushroll area.
Turn off and unplug the vacuum. Remove any
blockages in the brushroll.
The brushroll is worn or broken.
Call 1-844-608-3080 (US) / 1-844-608-3081
(CA) for assistance.
Dust bag
chamber cover
can’t be installed.
Dust bag is missing or not installed
into place. Position dust bag correctly and snap firmly
into place. Follow instructions on page 19-20.
- 26 -
TROUBLESHOOTING