Kenmore BC3060, Инструкция по использованию и уходу

Страница: 21 / 75

- 21 -
TO CLEAN BRUSHROLL:
NOTE:
In order to keep cleaning efficiency
high and to prevent damage to your
vacuum cleaner, the brushroll must be
cleaned every time the belt is changed.
The brushroll must also be cleaned
according to the following schedule:
Vacuum Cleaner Use Clean Brushroll
HEAVY -
MODERATE - every month
LIGHT - every 2 months
IMPORTANT
Turn off and unplug vacuum cleaner from
electrical outlet. Check and remove hair
string and lint build-up in the PowerMate
®
brushroll and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush unit area.
Carefully remove any string wound onto
the brushroll and end caps.
TO REPLACE BELT
1. Install new belt over motor shaft, then
over belt path.
NOTE:
See
REPLACEMENT PARTS
for part
number and purchase details (page 6).
2. Place brushroll assembly back into
PowerMate
®
.
3. Line up front of cover and base. Rest
cover on front edge of base as shown.
4. Rotate cover back. Press cover firmly
until side and rear latches snap into
place.
NOTE: Make sure there is no gap between
the cover and base.
5. Turn PowerMate
®
upside down and
replace the four (4) screws that secure
the cover to the base.
(used daily)
(used 2-3 times/week)
(used 1 time/week)
every week
End Cap
End Cap
Belt Path
Brush Unit
BRUSHROLL ASSEMBLY
Cover
Base
BELT CHANGING AND BRUSHROLL CLEANING
End Cap
Brushroll
Belt
Belt Path
Motor Shaft