background image

- 4 -

IMPORTANT SAFETY INSTRUC

TIONS

Read all instructions in this guide before assembling or using your vacuum cleaner.

Your safety is important to us. To reduce the risk of 

fi

re, electrical shock, injury to

persons or damage when using your vacuum cleaner, follow basic safety

precautions including the following:

WARNING:

SAVE THESE INSTRUCTIONS

Proper assembly and safe use of your vacuum cleaner are your responsibilities.  Your vacuum

cleaner is intended for 

Household Use

. Read this Use & Care Guide carefully for important

use and safety information.  This guide contains safety statements under warning  and

caution symbols.

Use

your vacuum cleaner only as described

in this guide.  Use only with manufacturer’s

recommended attachments.

Disconnect

electrical supply before servicing

or cleaning out the brush area.  Failure to do

so could result in brush unexpectedly starting

causing personal injury from moving parts.

Do not

leave vacuum cleaner when plugged

in.  Unplug from outlet when not in use and

before performing maintenance.

To

reduce the risk of electrical shock - Do

not use outdoors or on wet surfaces.

Do not

allow to be used as a toy.  Close

attention is necessary when used by or near

children.

Do not

 use with a damaged cord or plug. If 

vacuum cleaner is not working as it should, 

has been dropped, damaged, left outdoors, 

or dropped in water, immediately discontinue 

use and call 1-877-531-7321 (US) / 

1-844-608-3081 (CA) for assistance.

Do not

pull or carry by cord,  use cord as a

handle,  close a door on cord, or pull cord

around sharp edges or corners.  Do not run

vacuum cleaner over cord.  Keep cord away

from heated surfaces.

Do not

unplug by pulling on cord. To unplug,

grasp the plug, not the cord.

Do not

handle plug or vacuum cleaner with

wet hands.

Do not

put any objects into openings.  

Do not

use with any opening blocked;  keep

free of dust, lint, hair, and anything that may

reduce air 

fl

ow.

Keep

hair, loose clothing, 

fi

ngers, and all

parts of body away from openings and

moving parts.

Turn o

all controls before unplugging.

Use

extra care when cleaning on stairs.

Do not

put on chairs, tables, etc.  Keep on

fl

oor.

Do not

use vacuum cleaner to pick up

fl

ammable or combustible liquids (gasoline,

cleaning 

fl

uid, perfumes, etc.), or use in

areas where they may be present.  The

fumes from these substances can create a

fi

re hazard or explosion.

Do not

pick up anything that is burning or

smoking, such as cigarettes, matches, or hot

ashes.

Do not

use vacuum cleaner without dust cup

and/or 

fi

lters in place.

Always

change the dust bag after

vacuuming carpet cleaners or freshener,

powders, and 

fi

ne dust.  These products clog

the bag, reduce air

fl

ow and can cause the

bag to burst.  Failure to change the bag

could cause permanent damage to the

vacuum cleaner.

Do not

use the vacuum cleaner to pick up

sharp hard objects, small toys, pins, paper

clips, etc.  They may damage the vacuum

cleaner.  

Do not

operate the vacuum cleaner without

the exhaust 

fi

lter or 

fi

lter door in place. 

The hose contains electrical wires. Do not use

when damaged, cut, or punctured.  Replace

if cut or worn.  Do not pick up sharp objects.

Always

turn o

 and unplug vacuum cleaner

before connecting or disconnecting either

hose, wand, or PowerMate

®

.

Hold

plug when rewinding onto cord reel.

Do not allow plug to whip when rewinding.

You

are responsible for making sure that

your vacuum cleaner is not used by anyone

unable to operate it properly.

Содержание BC3005
























Отзывы: