Kenmore BC3002, Инструкция по использованию и уходу

Страница: 12 / 48

- 12 -
ATTACHMENTS
CAUTION
DO NOT attach or remove handle or wands while vacuum cleaner is ON. This could
cause sparking and damage the electrical contacts or electronic controls.
ATTACHMENT STORAGE
This canister is equipped with an on-board
storage area for the fl oor brush.
See ATTACHMENT USE TABLE (page 14).
Use the 3-in-1 combination tool in crevice
tool mode for cleaning in tight spaces such
as furniture, between cushions, and stairs.
See ATTACHMENT USE TABLE (page 14).
The PowerMate
®
must be in the fl at position
for storage attachment. Use the handle
release pedal to place it in this position.
The wand will slip out of the slot as it is
lifted up for use and will slide into the slot
as it is lowered for storage.
POWERMATE STORAGE
The lower wand has a U-shaped storage
hook at its base that slides into the U-shaped
slot on the canister. The storage hook allows
the wands and PowerMate
®
to be stored with
the canister to conserve storage space.
The canister must be stored on end for this
feature to be used.
®
EDGE CLEANER
Active brush edge
cleaners are on both
sides of the
PowerMate . Guide
either side of the
PowerMate along
base-boards or next
to furniture to help
remove dirt trapped
at carpet edges.
®
®
Storage
Hook
Slot
3-IN-1 COMBINATION TOOL
The 3-in-1 combination tool can be attached
to the end of the wand and the handle.
Slide the collar of the tool over the open
end of the wand or handle.
Set the combination tool in dusting brush
mode by pressing the release button and
sliding the dusting brush side of the brush
tool to the end of the combination tool.
Floor Brush