Kenmore 970C4256, Инструкция по использованию и уходу

Страница: 38 / 42

38
Care and Cleaning
Removing and Replacing the Oven Door
The door is heavy. For safe, temporary storage,
lay the door flat with the inside of the door facing down.
To remove the oven door:
1. Open oven door completely, horizontal with floor (See
Figure 55 ).
2. Pull the door hinge locks on both left and right door hinges
down from the oven frame completely toward the oven
door (See
Figure 56 ). A tool such as a small flat-blade
screwdriver may be required.
3. Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (See Figure 57 ).
4. Close the door to approximately 10 degrees from the oven
door frame.
5. Lift the oven door hinge arms over the roller pins located on
each side of the oven frame (See Figure 57 ).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (See
Figure 57 ).
2. Holding the oven door at the same angle as the removal
position (See Figure 57 ), seat the hook of the hinge arm
over the roller pins located on each side of the oven door
frame (See
Figure 58 ). The hook of the hinge arms must be
fully seated onto the roller pins.
3. Fully open the oven door, horizontal with floor (See
Figure 55 ).
4. Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the locked
position (
Figure 56 ).
5. Close the oven door.
Important:
Special Door Care Instructions - Most oven doors contain glass
that can break.
• Do not close the oven door until all the oven racks are fully
in place.
• Do not hit the glass with pots, pans, or any other object.
Scratching, hitting, jarring, or stressing the glass may
weaken its structure causing an increased risk of breakage
at a later time.
Figure 55: Door hinge location
Figure 56: Door hinge locks
Figure 57: Holding door for removal
Figure 58: Location of hinge arm and roller pin
Oven door
hinge
locations
LOCK
about
10°
hinge
oven
door
roller
pin
hinge
arm