Kenmore 970-7050 Series Скачать руководство пользователя страница 27

Страница: 27 / 32

Care & Cleaning (continued)

Care and Cleaning Tips

Part

Cleaning Agents

Tips and Precautions

Interior &

Door Liners

•

Soap and water

•

Baking soda and

water

•

Use two (2) tablespoons of baking soda in one (1) quart of warm water.

•

Be sure to wring excess water out of sponge or cloth before cleaning

around controls, light bulb or any electrical part.

Door

Gaskets

•

Soap and water

•

Wipe gaskets with a clean soft cloth.

Drawers &

Bins

•

Soap and water

•

Use a soft cloth to clean drawer runners and tracks.

•

Do not wash any removable items (bins, drawers, etc.) in dishwasher.

Glass

Shelves

•

Soap and water

•

Glass cleaner

•

Mild liquid sprays

•

Allow glass to warm to room temperature before immersing in warm water.

Toe Grille

•

Soap and water

•

Mild liquid sprays

•

Vacuum

•

Remove toe grille (see Installation Instructions).

•

Vacuum both sides and wipe with sudsy cloth or sponge. Rinse and dry.

Exterior &

Handles

•

Soap and water

•

Non abrasive glass

cleaner

•

Do not use commercial household cleaners containing ammonia, bleach or

alcohol to clean handles.

•

Use a soft cloth to clean smooth handles.

•

Do not use a dry cloth to clean smooth doors.

Exterior &

Handles

(Stainless

Steel Models

Only)

•

Soap and water

•

Stainless steel

cleaners

•

Never use CHLORIDE or cleaners with bleach to clean stainless steel.

•

Clean stainless steel front and handles with non-abrasive soapy water and

a dishcloth. Rinse with clean water and a soft cloth.

•

Use a non-abrasive stainless steel

cleaner. These cleaners can be purchased

at most home improvement or major department stores. Always follow

manufacturer’s instruction. Do not use household cleaners containing

ammonia or bleach.

•

NOTE: Always clean, wipe and dry with grain to prevent scratching.

•

Wash the rest of the cabinet with warm water and mild liquid detergent.

Rinse well and wipe dry with a clean soft cloth.

Ice Chute Extension

The ice chute extension is
designed to better direct ice
flow into containers.

Removing the Ice Chute
Extension For Cleaning

1. Turn the refrigerator off using

the button on the control
panel (refer to the “Controls”
section of this Manual).

2. Press inward firmly on

the front of the chute and
pull down.

3. Turn your refrigerator

back on.

Push Upward Until The

Extension Snaps In Place

Pull Down

Press Here

Firmly

Installing the Ice Chute
Extension

1. Turn the refrigerator off using

the button on the control
panel (refer to the “Controls”
section of this Manual).

2. Align the extension with the

ice chute so that the snap
clips are just inside the front
edge of the chute.

3. Push upward until the extension snaps into place.
4. Turn your refrigerator back on.

Содержание 970-7050 Series

































Результаты поиска

Содержание 970-7050 Series

Отзывы:

Похожие инструкции для 970-7050 Series

Бренды по названию

Популярные бренды

Kenmore 970-7050 Series, Инструкция по использованию и уходу

Результаты поиска

Содержание 970-7050 Series

Отзывы:

Похожие инструкции для 970-7050 Series

Бренды по названию

Популярные бренды