Kenmore 90113, Инструкция по использованию и уходу

Страница: 23 / 36

11
12
Inside of cart, connect the fi ve wires from burner electrodes into the back of Electronic Ignition module,
Attach towel bar to right side extended shelf using two 1/4-20x1/2” screws, 7mm lock washers and 7mm
Note: Switch terminals are larger than electrode terminals and should only be installed in locations (a)
Connect the two wires [(a) and (b)] from switch wiring harness into the back of Electronic Ignition module,
(a)
(b)
Electronic ignition
+
-
Cap
AA battery
Left side panel
C
A
B
Nut
Electronic ignition
Tie wrap
Left side panel
module
NOTE: Wires omitted for clarity of illustration.
Remove the cap and nut from electronic ignition module. Attach electronic ignition module to the cart left
side panel with the nut, shown B.
Insert AA battery into ignition module, negative (-) end fi rst. Then put on the cap, shown C.
1
2
3
4
5
module
Extended shelf
Towel bar
Right side fascia
screw 7mm lock
washer
7mm fl at
washer
positions 1 - 5, shown A.
shown A.
and (b).
fl at washers.
1/4-20x1/2” screw
1/4-20x1/2” screw
Qty.2
Qty.2
Qty.2
7mm lock washer
7mm fl at washer
46
6
224411 • 2
3