background image

6

FEATURES AND BENEFITS

KEY PARTS AND COMPONENTS

A

B

C

D

E

F

G

DETERGENT DISPENSER

There are four compartments, one each for prewash, 

main wash, liquid bleach, and liquid fabric softener.

CONTROL PANEL

The easy-to-read LED display shows cycle options, 

settings, cycle status, and estimated time remaining during 

operation. 

NOTE: 

Sensors in the washer automatically detect the 

size of the wash load to optimize washing time, based 

on the selected cycle and options.

DIRECT-DRIVE MOTOR

The direct-drive motor provides improved performance 

and reliability while increasing energy e

  ciency.

(Motor is not visible.)

LARGE-CAPACITY STAINLESS STEEL DRUM

The ultra-large stainless steel drum o

 ers extreme 

durability and is tilted to improve e

  ciency and allow 

easier access for large items.

EASY-ACCESS LOCKING DOOR

The extra-large door locks during operation. The door 

will not open until it is safe to do so.

FILTER ACCESS PANEL

Provides easy access to the drain pump 

fi

 lter, which allows 

you to clean the 

fi

 lter or retrieve lost items without a 

service call.

LEVELING FEET

Four leveling feet (two in the front and two in the back) 

adjust to improve washer stability on uneven 

fl

 oors. Feet 

are adjusted and locked in place using the adjusting 

wrench included with the washer.

Shipping Bolts/Retainers (4)

NOTE: Bolts/Retainers MUST be removed prior to 

operation. Keep for future use.

Cold and Hot Water Inlets

Power 

Cord

Drain 

Hose

Rear of Washer

Drain Hose Extension

P/N 5215ER2002K

17013 (Chrome Look)

Stacking kit (For dryer)

51022 (White)
51023 (Metallic Silver)

Pedestal

Optional Accessories

A

B

C

D

E

G

F

Wrench (for removing

shipping bolts and

adjusting and

locking leveling feet)

Elbow Bracket

(for securing

drain hose)

Tie Strap

(for securing

drain hose)

Included Accessories

Wrench appearance may vary.

Included Accessories

Caps (4)

(for covering

shipping bolt holes)

Non-skid pads

Содержание 796.4118#31 Series
































Отзывы: