manualshive.com logo in svg

Kenmore 796.4044*9 Series, Руководство по обслуживанию, Страница: 14 / 60

Поделиться
Скачать
Kenmore 796.4044*9 Series Скачать руководство пользователя страница 14

13

WASH/RINSE, SPIN SPEED, SOIL LEVEL, CHIME

• Select a water temperature based on the type of load you are washing. 

• To change the spin speed, press the Spin Speed button repeatedly to cycle through available options.

• To change the soil level, press the Soil Level button repeatedly until the desired setting is on.

• Press repeatedly to adjust the volume of the Chime

OPTION BUTTON

•

STAIN TREAT:

Use this option for heavily soiled loads that need improved stain treatment.

•

2

nd

RINSE: 

Use this option to add an extra rinse to the selected cycle.

•

ADD STEAM: 

Use this option to remove stains on fabrics without the energy usage or potential 

damage to fabrics. 

•

DELAY START: 

Use this option to delay the start of the wash cycle. Each press of the button increases

the delay time by one hour, for up to 19 hours.

•

CLEAN WASH: 

Use this option to lead to a mildew or musty smell on the washer.

•

CONTROL LOCK: 

Use this option to prevent children from changing cycles or operating the machine.

Содержание 796.4044*9 Series





























































Отзывы:

Нет отзывов