Kenmore 796.3141#31#, Инструкция по использованию и уходу

Страница: 22 / 68

22
OPTION BUTTONS
FABRIC SOFTENER
Fabric softener is dispensed in the fi nal
rinse. This washer is designed to save
rinse water by using a jet spray rinse
system (SMARTRINSE) in NORMAL/CASUAL and HEAVY
DUTY cycles. Press the FABRIC SOFTENER button to
change the fi nal rinse from spray rinse to regular rinse so
that the fabric softener is most e ff ective.
NOTE: Select the FABRIC SOFTENER option or
EXTRA RINSE option if liquid fabric softener is used in
NORMAL/CASUAL and HEAVY DUTY cycles. Failure
to select one of these options will greatly reduce the
e ff ectiveness of the softener.
MY CYCLE
MY CYCLE allows you to store a customized
wash cycle for future use. It allows you to
save favorite temperature, spin speed, soil
level, and other options for a cycle, and then recall them at
the touch of a button.
NOTE: You can only save one cycle at a time. Pressing
and holding the MY CYCLE button will overwrite any
previously saved cycle.
To save a MY CYCLE:
Press the POWER button to turn on the washer.
Turn the cycle selector knob to select the desired
cycle.
Press the CYCLE MODIFIER buttons to change the desired
settings.
Press the CYCLE OPTION buttons to add the desired
options.
Press and hold the MY CYCLE button.
To recall a MY CYCLE:
Press the POWER button to turn on the washer.
Press the MY CYCLE button. The stored settings will be
displayed.
Press the START/PAUSE button to start the cycle.
NOTE: MY CYCLE can be adjusted the same as any
other cycle. However, once any other button is pressed,
the MY CYCLE button LED will turn o ff indicating that
the settings are no longer those of your saved cycle.
SOAK
This option provides a 30 minute presoak
prior to the start of the selected cycle. Use
the SOAK option to presoak garments to
help remove di ffi cult spots or stains on fabrics. At the end of the
presoak time, the selected cycle will begin with the same water
used for the soak.
1
2
3
4
5
1
2
3
HOW TO USE
DELAY WASH
Once you have selected the cycle and
other settings, press this button to delay
the start of the wash cycle. Each press
of the button increases the delay time by one hour, for
up to 19 hours. Once the desired delay time is set, press
the START/PAUSE button to start the delay time.
NOTE: If the START/PAUSE button is not pressed to
begin the delay time, the washer will automatically shut
o ff after four minutes.
RINSE & SPIN
Select this option to rinse and spin a
load separately from a regular cycle.
This can be helpful in preventing fresh
stains from setting in fabrics. You can change the spin
speed by pressing the SPIN SPEED button
Press the START/PAUSE button to turn on the washer.
Press the RINSE & SPIN button.
Press the SPIN SPEED button to select the desired
spin speed. Selecting NO SPIN is not allowed.
Press the START/PAUSE button.
CONTROL LOCK
Use this option to disable the controls. The
washer can only be locked during a cycle.
This feature can prevent children from
changing cycles or operating the machine. Once the control
lock is set, it must be deactivated before any controls, except
the power button, can be used. Once the washer has shut
o ff , the power button will allow the machine to be turned
ON, but the controls will still be locked. When the controls
are locked,
CL
will display alternately with the estimated
time remaining. Press and hold the RINSE & SPIN button for
fi ve seconds to activate or deactivate CONTROL LOCK.
1
2
3
4
SPECIAL DRAIN FEATURE
This washer is equipped with a special feature that is
designed to make your washer as safe as possible.
If the washer is paused or shut o ff while there is still water
in the tub, the water will drain after several minutes. This
helps keep children safe by reducing the possibility of
water remaining in the tub. The washer can be restarted
any time before the drain begins.
If no action is taken, the
error code will display and
the water will drain from the tub. Once the washer begins
draining the water, the controls are disabled and the
drain process cannot be interrupted. Once the water is
completely drained, the washer will shut o ff .
NOTE: In the unlikely event that the washer experiences
a problem that causes an error code to be displayed, the
washer will still drain after several minutes. However, only
the original error code will be displayed.