manualshive.com logo in svg

Kenmore 795. 72062.21 series, Руководство по обслуживанию

Поделиться
Скачать
Kenmore 795. 72062.21 series Скачать руководство пользователя страница 21

- 21 -

3-26 

HOW TO REMOVE AND REINSTALL THE HOMEBAR

3-26-1 CASE ASSEMBLY, HOME BAR

The Home Bar is removable for easy cleaning and
adjustment.

1. To remove the Home Bar, Slopingly lifts the Home Bar
up and pulls straight out.

2. To replace the Home Bar, Slopingly slides it in above
the desired support and push down until it snaps into
place.

NOTE

: Some Home Bar may vary in appearance and

will only fit in one location.

3-26-2 DOOR BASKET OF HOME BAR DOOR

The Door Baskets are removable for easy cleaning and
adjustment.

1. To remove the Door Baskets, simply lifts the Door
Baskets up and pulls straight out.

2. To replace the Door Baskets, slides it in above the
desired support and push down until it snaps into place.

NOTE

: Some Door Baskets may vary in appearance

and will only fit in one location.

3-26-3 DOOR BASKET OF HOME BAR

The Door Baskets of Homebar are removable for easy cleaning and adjustment.

1. To remove the Door Baskets of Homebar, simply lifts the Door Baskets of Homebar up and pulls straight out.

2. To replace the Door Baskets of Homebar, slides it in above the desired support and push down until it snaps into
place.

NOTE

: Some Door Baskets of Homebar may vary in appearance and will only fit in one location.

 

!

Содержание 795. 72062.21 series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды