manualshive.com logo in svg

Kenmore 795.6827 Series, Руководство по обслуживанию

Поделиться
Скачать
Kenmore 795.6827 Series Скачать руководство пользователя страница 41

- 41 -

 Primary Error:

 F sensor, R1 sensor, D sensor, defrost errors, F-FAN errors.

 Secondary Error:

 I / M sensors, I / M Kit

When an error occur the first 3 hours the Primary Error and Secondary Error is indicated in the display check mode (Pressing 
Cold key on freezer and Cold key on refrigerator more than 1 Second). After the 3 hours and if the error is still present the 
Primary Error will show in the display automatically (See Note 1) and the Secondary Error is indicated in the display check 
mode.

Note1: In the Primary Error after 3 hours of the error occur all display lights turn OFF except the Freezer Temperature (Trouble 
Code Index) indicating the failure mode.

*LED check function: When there’s no error, If simultaneously pressing the Cold key of refrigerator Temp and the Cold key of 
freezer temp for a second, all display LED graphics on. If releasing the button, the LED graphics displays the previous status.

ERROR CODE on display panel

8-1-10  Defect Diagnosis Function 

Micom error are separated in “Main Errors” (Affect directly refrigerator performance)  and “Secondary Errors” (don’t affect the 
refrigerator performance).
To check in Display the error present, is necessary press Cold key on freezer and Cold key on refrigerator more than 1 
Second, if no there any error, all LED will be illuminated, if a main error is present, only certain LED will be illuminated, in case 
of secondary errors, only one LED or icon will not illuminated.

No.

Item

Contents

Remarks

1

Normal

None

DISPLAY switch operates 
normally

2

Failure of Freezer 
sensor

Er

Fs

Cut or short circuit wire

3

Failure of Refrigerator 
sensor

Er

rS

Cut or short circuit wire

4

Failure of Defrost sensor

Er

dS

Cut or short circuit wire

5

Failure of Defrost mode

Er

dH

When defrost sensor does not 
reach 8°C within 1 hour after 
starting defrost.

Snapping of defrost heater 
or temperature fuse, 
pullout of connector 
(indicated minimum 2h 
aftera failure occurs)

6

Failura of BLDC fan 
motor at freezing 
compartment

Er

FF

If there is no fan motor signal for 
more than 115 sec in operation 
fan motor.

Poor motor, hooking to 
wires of fan, contact of 
structures to fan, snapping 
or short circuit of lead 
wires.

7

Faillure of Icemaker Kit

Er

It

Failure of wires such as motor in 
I/M KIT GEAR, HALL IC

When the ice ejecting does 
not operated on pressing 
the I/M TEST S/W

8

Failure of Icemaker 
sensor

Er

IS

Snapping or short circuit of ice 
making sensor

Connecting wire Test On 
Sensor

Error Indication

NOTCH Indication

Inspect Connecting wires 

on each sensor

Содержание 795.6827 Series



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды