manualshive.com logo in svg

Kenmore 795.6827 Series, Руководство по обслуживанию

Поделиться
Скачать
Kenmore 795.6827 Series Скачать руководство пользователя страница 21

- 21 -

Fig. 92

Flip the middle hinge bracket and position on 
left side of refrigerator and re-attach with 
two bolts and a 2 phillips screws.

Fig. 93

Place screws into outer holes on right side of cabinet.

Attach cover on the right side. Cover is force-fitted.

With a flat-head screwdriver, carefully pry off and 
remove the cover over the screw holes on the left side 
of refrigerator housing.

Fig. 90

You will need these holes for the Middle Hinge Bracket.

Remove the 2 outer screws from cabinet frame as

Fig. 91

shown.

Before

After

Change the Hinge Pin from the right side to left side. 

Move the Bottom Hinge to the left side keeping  
the same orientation and attach 2 bolts.

Fig. 97

Fig. 96

Using a 13/32” or 10mm socket wrench with 
2” extension, loosen the 2 bolts and remove 
bottom hinge from right side.

Remove the bolt on bottom of refrigerator from 
the left side and insert it on the right side. 
You will need this hole for the Bottom Hinge.

Fig. 95

Left Side Right Side

Bottom Hinge
Bracket

Bottom Hinge Pin

Fig. 94

Содержание 795.6827 Series



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды